Optical vibration isolation is implemented in laser-optical experiments. This is a type of isolation process that might be very seldom to be implemented. Optical vibration isolation uses certain optical table during the isolation so that the isolation can be done properly.
One of optical tables for optical vibration isolation that can be considered come from DVIO series. These are high-quality steel honeycomb optical tables that exhibit the optimal combination of high rigidity, low weight, good modal response and vibration damping. The pneumatic isolators used for supporting optical tables provide excellent vibration isolation in both vertical and horizontal directions. These optical tables will fully satisfy the customer’s needs for any sophisticated laser-optical experiments.
The high-quality steel honeycomb optical tops for the optical vibration isolation consist of a steel honeycomb core laminated with steel top and bottom skins provide high stiffness with respect to low weight. The steel honeycomb core is sandwiched between two faces of skin materials (laminated with steel bottom and ferromagnetic stainless steel top skins) and finished with side panels.
This also features the top skins for workplace surface that are stretcher-leveled and pressure bonded to achieve excellent top flatness and lightly sanded with an orbital pattern to remove burrs and provide non-glare & non-reflecting finish. This means that the optical experiment and optical vibration isolation can be completed easily.
In fact, there are two types of table supports that can be chosen for optical vibration isolation that you do. They are DVIO-I type(pneumatic isolators) and DVIO-R type(rigid supports). DVIO-I comes with high performance pneumatic isolators are used for supporting an optical top in order to perform any precision optical experiments. Meanwhile, the DVIO-R Rigid Type comes with economical rigid support. This is utilized of vibration isolating rubbers that are used for harmonizing with an optical top when the vibration level is not highly crucial.
There are many features offered by optical table for the optical vibration isolation. This features high quality steel honeycomb table tops. This also features a perfect plane board for optical experiments that is utilized with a honeycomb snadwich panel structure, which has the excellent rigidity and relatively light weight considering the mass. An array of mount holes on the magnetic attachable stainless top easily provides a researcher to secure optical components onto it.
The second great feature of this optical table for optical vibration isolation that you do is that this is possible to do any directional vibration isolation. The conventional pneumatic isolators have lower vibration isolation efficiency in horizontal direction than vertical in general. But DAEIL’s new isolators provide an excellent isolation in all directions by the special designed horizontal vibration removal mechanism and the isolator’s natural frequency is relatively low.
As other vibration isolation system, in this optical vibration isolation table also features high damping. An ideal vibration isolation system should provide both best vibration isolation and high damping. DAEIL’s pneumatic isolator utilizes damping techniques, and reduces the amplification at the natural frequency and prevents the system from rocking in response to transient disturbances.
Furthermore, this optical vibration isolation table also features self-levelling top. The constant height is maintained and controlled by an air regulator valves, actuated by table motion. This system also provides self-levelling of the table top when loads are moved across the work surface or sudden load change occurs.
All those features will be very supporting for optical vibration isolation that you do. You will find that each feature will benefit you so that you can do the proper isolation in order to get the isolation that you want. Definitely, this will be great thing for your optical experiments.
